<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=157902874662484&amp;ev=PageView&amp;noscript=1">
Skip to content
Stephen NewmanNov 17, 2026, 1:27:39 PM6 min read

Fridge and freezer cyber-attacks have reached the UK. Here is what to do now

Since early October, attackers have remotely switched supermarket fridges and freezers into defrost across Europe. Hundreds of French stores were hit in early October. On 2 November a second wave reached Belgium, Luxembourg, the Netherlands, Sweden, Ireland, Estonia and Finland, with some units pushed as high as 50°C overnight. Retailers threw away stock worth millions of euros.

The UK has not escaped. The National Cyber Security Centre (NCSC) confirmed "a couple of instances where vulnerable technology had been exploited" in the UK food supply chain, and warned that this is not just a supermarket problem: "it's through the whole food supply chain." Members of the Association of Independent Meat Suppliers saw cold units start to defrost. They were lucky: the units were empty at the time.

If you run fridges, freezers or cold rooms, whether in a store, a kitchen, a pharmacy, a lab or a warehouse, here is what happened, what to do about it this week, and how to make sure a problem overnight reaches someone in time.

How the attacks worked

The attackers did not break the fridges. They logged into the systems that control them.

Many commercial refrigeration installations use a supervisory controller that sets temperatures, schedules defrost cycles and lets an engineer manage the equipment remotely. According to the Centre for Cybersecurity Belgium, the attackers targeted controllers whose web management interfaces were reachable from the public internet, running out-of-date firmware or still using default passwords. Once in, they forced units into maximum-temperature defrost cycles, usually overnight when nobody was watching.

The NCSC has described the attacks as unsophisticated. They used weaknesses that were published, and in some cases patched, months ago. That is the uncomfortable part: this was preventable, and the same exposure is likely still sitting in plant rooms across the UK.

Five things to do this week

The NCSC and its European counterparts have been consistent in their advice. In practical terms:

  1. Find out what is connected. List every refrigeration and building controller on your sites, including any installed and managed by your refrigeration contractor. Note the make, model and firmware version.
  2. Take them off the public internet. Controllers should not be reachable from the open internet. Remote access for engineers should go through a secured VPN with multi-factor authentication.
  3. Update firmware and change default passwords. Ask your contractor which units still receive security updates and which need upgrading or replacing.
  4. Check your configuration. Confirm set points and defrost ranges are what they should be. A unit that was tampered with may still be configured to fail.
  5. Know who gets called at 2am. Decide who is alerted when a unit drifts out of range overnight, who is authorised to isolate a controller, and how they do it. One London wholesaler stopped an attack by physically unplugging a fridge from the network after watching it switch into defrost.

The first four steps close the door. The fifth assumes that one day something will get through, whether it is an attacker, a failed compressor or a power cut, and makes sure a person finds out in time to act.

The overnight gap

These attacks were timed for the hours when stores and kitchens are empty. That is also when traditional food safety checks stop. A manual temperature log filled in at close and again at opening tells you what the fridge read at those two moments. It cannot tell you whether the freezer spent four hours at 20°C in between.

It also matters who is reporting the temperature. If the only reading you have comes from the same controller that was compromised, you are relying on the system that failed to tell you it has failed.

How Checkit-monitored sites are covered

Checkit's automated monitoring is designed to sit alongside your refrigeration, not inside it. On sites Checkit monitors, an attack like this one plays out differently.

  • Independent measurement. Checkit's self-contained wireless sensors sit in the fridge, freezer or cold room and measure the temperature directly. They report through Checkit's own low-power wireless network and hub to the Checkit cloud. They do not change set points or trigger defrost cycles. If a controller is tampered with, Checkit still sees what is actually happening to the product.
  • Alert limits that live outside the controller. Checkit's alert ranges are set in Checkit, against the limits the product needs. Changing the set point or defrost schedule on the refrigeration controller does not move them.
  • Alerts that reach a person. When a reading moves out of range, Checkit raises an alert by SMS, email and, where needed, voice call, with multi-stage escalation so an alert does not sit unseen. For sites that need it, a 24/7 Alarm Calling Service is available to cover the overnight hours.
  • From alert to action. An alert becomes a corrective action with an owner, so the response is recorded: who was notified, when they acted and what they did. That record matters when you are talking to an EHO, an auditor or your insurer after an incident.
  • Records that survive disruption. Sensors store their readings and transfer them intelligently so records are not lost, the hub has battery backup, and system self-diagnostics flag when part of the network stops reporting.
  • Security that is independently certified. Checkit holds ISO/IEC 27001:2022 certification for information security, alongside Cyber Essentials and ISO 9001. Where Checkit needs to connect to your internal network, it can do so securely via VPN. See our certifications.

Monitoring does not replace patching or network security. The five steps above are still the first line of defence. What independent monitoring gives you is a second line: if refrigeration fails for any reason, someone knows within minutes rather than at opening time.

Making sure the alert reaches the right person

Monitoring is only as good as the response behind it. A few checks are worth doing now, while this is fresh:

  • Match the escalation path to the rota. The first person alerted should be someone who can actually reach the unit, including at night and at weekends, when cover often looks different. Take leavers off the list. An escalation path that ends at someone who left in the spring is a fridge with nobody watching it.
  • Decide how long an alert can wait. Set an acknowledgement window that fits the shift, and let the alert move to the next person if it is missed. A phone on silent in a drawer should not be a single point of failure.
  • Set limits for the product, not the machine. The set point is the instruction to the fridge. The alert range is the limit for what is inside it. Keep the two separate, so a tampered or mistaken set point still triggers an alert.
  • Name units so the alert says what is at risk. "Pharmacy vaccine fridge" gets a faster, better response at 2am than "Fridge 2".
  • Treat an overnight alert as a hold on the stock. A unit that is back in range by morning is not a decision about the food or medicines inside it. Release the stock with a recorded decision, not a comment that says "ok now".
  • Watch the trace after any reset. If a controller is reset or an engineer visits, the next quiet period on that unit tells you whether it is really fixed.

Questions to ask about your current monitoring

Whatever system you use today, these are worth answering:

  • Does our temperature data come from the same system that controls the refrigeration?
  • If a freezer warmed up at 2am on a Sunday, who would be told, how, and how quickly?
  • Can we show an auditor or insurer exactly when an excursion started and how we responded?
  • Has our monitoring provider's security been independently certified?

If any of those answers are unclear, now is a good time to fix it, before the next wave rather than after it.

Talk to us

Whether you want to review a new set-up or check how your current one would handle an overnight temperature event, our team can walk you through it. Book a conversation with Checkit.

avatar

Stephen Newman

Stephen is the Head of Marketing for Checkit

RELATED ARTICLES